Kenwood TH-D7E - Manual (Page 76)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
70
ENTERING STATUS TEXT
You can also transmit any comment (status text) with the
latitude/ longitude data. If you want, enter a desired
comment using a maximum of 20 alphanumeric
characters.
Note: Attaching a long comment can double the size and length of the
packet. Enter a comment only if necessary.
1 Press [MENU] to enter Menu mode.
2 Press [2], [6] to select “2–6 (STATUS TEXT)”.
• The display for entering a comment appears; the first
digit blinks.
3 Press [UP]/ [DWN] to select a character.
• You can enter alphanumeric characters plus special
ASCII characters.
4 Press [OK].
• The cursor moves to the next digit.
5 Repeat steps 3 and 4 to enter up to 20 digits.
• Pressing [OK] after selecting the 20th digit completes
the programming.
• To complete programming a comment after entering less
than 20 digits, press [OK] twice.
• Each press of [ESC] causes the cursor to move
backward.
• Pressing [A/B] deletes the digit at which the cursor is
blinking.
6 Press [MENU] to exit Menu mode.
You can also use the keypad to enter alphanumeric
characters in step 3. For example, each press of [TNC]
switches entry as A, B, C, a, b, c, then 2. Press [DUAL]
to switch 0 and space. Press [ENT] to switch among the
special ASCII characters.
STA CON 96BCONDUP
9 7 5
TH-D7 E 61 APRS 98.12.4, 0:13 PM 70