Kenwood TH-D7E - Manual (Page 49)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
43
This transceiver allows you to switch the DTMF
number transmission speed between Fast (default)
and Slow. If a repeater cannot respond to the fast
speed, access Menu 1–3–2 (TX SPEED) and select
“Slow”.
You can also change pause duration stored in
memory channels; the default is 500 msec. Access
Menu 1–3–4 (PAUSE). The selectable pauses are
100, 250, 500, 750, 1000, 1500, and 2000 msec.
■ Transmitting a Stored DTMF Number
1 Press [PTT]+[MENU].
2 Release only [MENU], then press [UP]/ [DWN] to
select the desired DTMF memory channel.
3 While still holding [PTT], press [MENU] again.
• The number stored in the channel scrolls across the
display accompanied by DTMF tones from the
speaker.
• After transmission, the frequency display is restored.
If you need not confirm the memory channel
contents, press [0] to [9] instead of [UP]/ [DWN] in
step 2 to select a channel number. The stored DTMF
number will be immediately transmitted. You need
not press [MENU] in step 3.
STA CON PACKET96BCONDUP
9 7 5
TH-D7 E 41 DTMF Functions 98.12.4, 0:12 PM 43