Kenwood TH-D7E - Manual (Page 89)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
83
Both the Commander and Transporter use Full Duplex
function to transfer audio and commands as below:
SKY COMMAND 2 2 2 2 2 (TH-D7A ONLY)
The Sky Command 2 allows remote control of a
TS-570D, TS-570S, or TS-870S HF transceiver. This
system requires two TH-D7As and the optional cables
which connect one TH-D7A to the HF transceiver. You
will use one TH-D7A as both a remote control and
speaker microphone. This TH-D7A is called
“Commander”. The TH-D7 connected with the HF
transceiver is called “Transporter”. It will function as an
interface between the Commander and the HF
transceiver. The Sky Command System allows you, for
example, to watch for and hunt DX while working around
the house, or to operate the HF transceiver while
relaxing in the living room or patio, instead of in the
shack.
VHF freq.
Audio
Audio s
Control command s
t Response
Audio UHF freq.
Control command s
t Response
Commander Transporter
VHF freq.
UHF freq.
Your shack
HF freq.
TH-D7 E 83 Sky Command 98.12.4, 0:13 PM 83