Konica Minolta PagePro 1380 MF - Manual (Page 42)

Introduction 44
Introduction
This machine allows you to scan from a TWAIN-compliant or plug-in applica-
tion. Since the scanner driver is not stand-alone software, it has to be started
from a TWAIN-compliant application to be able to scan and load an image to
your computer. The command to start the scanner driver may vary depending
on the application. To determine the correct command, refer to the user man-
ual for the application.
User interface operation
"
Do not open the ADF lid while documents loaded into the ADF are
being scanned.
1
Place the original document face down on the flatbed glass and align its
center with the arrow mark on the glass. If the optional ADF is installed,
put the top end of the document stack into the ADF input tray face up and
with the first page to be copied on top of the stack.
"
Before loading the document in the ADF, check that no document
pages remain on the flatbed glass.
2
Start the TWAIN scanning application.
3
From the File menu, click Select Source. If Select Source is not avail-
able in the File menu, refer to the application’s user manual to determine
how the TWAIN link is used. A dialog box with a list of scanning sources
appears.
4
Select or import PagePro 1380 MF. You need to select the source only
once, unless you want to choose a different scanner.