Konica Minolta PagePro 1380 MF - Manual (Page 88)

Solving print quality problems 90
There is insuf-
ficient fusing
or the image
comes off
when rubbed. The media is moist from
humidity. Remove the moist media and
replace it with new, dry media.
Media with specifications not
covered by the machine war-
ranty is being used. Use media that is covered by
the machine warranty.
The print
image is not
straight when
the ADF is
used to scan
the document. The document scanning posi-
tion for scanning with the ADF
is not aligned. Select “1. Common Setup”,
then “Adjust ADF Edge” to
adjust the scanning position.
For details, refer to “Adjusting
the image position” on page
93.
Symptom Cause Solution
A