Konica Minolta PagePro 1380 MF - Manual (Page 76)

Cleaning the optional ADF 78
Cleaning the optional ADF
From time to time the ADF pad and feeding rollers may become contami-
nated with ink, toner particles, or paper dust. In this case, documents may not
feed smoothly. If this occurs, follow the cleaning procedure described below.
1
Moisten a cotton swab with isopropyl alcohol (95%).
2
Gently open the ADF cover.
3
Wipe the feeding rollers by moving the swab from side to side. Rotate the
rollers forward with your finger and repeat the above cleaning procedure
until the rollers are clean. Be careful not to snag or damage the pick
springs.
4
Wipe the pad from top to bottom. Be careful not to snag the pick springs.
5
Close the ADF.
ADF pad
Feeding roller
Pick spring
1 2
3