Kodak XLS 8400 - Manual (Page 15)

Installing the Hardware
2-2 Part No. 1H9613 June 1997
Getting Ready to Install the Network Interface Card
Before you install the Network Interface Card, do the following
steps:
1. Write the Ethernet address needed for the installation in the
space provided below. It is located on the underside of the
Network Interface Card, on the front of the bracket, and on
the box the card is shipped in.
Keep this guide handy in case you need to reconfigure or add
more printers to your system.
00 40 C8 __ __ __ __ __ __
2. Turn off and unplug the printer.