Kodak XLS 8400 - Manual (Page 56)

Windows 95 Workstations
Part No. 1H9613 June 1997 8-1
8 Windows 95 Workstations
Network Interface Card/Printer Installation Overview
Section 1: Determine the network protocol(s) to be used for
communicating to the Network Interface Card and the printer, the
workstation platform(s) that will be used for creating and sending
jobs to the printer, and any servers that will be used to spool and
manage jobs sent to corresponding printer queues.
Section 2: Install the hardware for the Network Interface Card in
the Kodak printer.
Section 3: Install the software for the Network Interface Card.
NOTE: For Windows 95 a network server queue must be
selected so the only relevant software for the Network
Interface Card is Novell utilities for setting up a Novell
server (IPX)or UNIX utilities for setting up a UNIX server
(TCP/IP). No software is necessary for setting up the
Network Interface Card with NT server queues.
Section 4: Configure network printer parameters, if necessary.
Some are programmable from the printer’s front display/control
panel, and others are programmable by downloading PostScript
command files.
NOTE: We recommend that you use the default parameters
initially until the printer is functional on your network.
Section 5: Determine the printer modes of operation (PostScript
and/or Raster) to be used based on the model of printer that was
purchased. Install corresponding PostScript and/or Raster mode
software. Refer to appropriate platform-specific sections based
on their anticipated use as print servers and/or user workstations.