Kodak XLS 8400 - Manual (Page 50)

Novell NetWare
Part No. 1H9613 June 1997 6-11
Do the following procedure to configure Novell ATPS to service
the printer and the queue. In this example, the printer is a Kodak
printer with a default name of Kodak DS 8650 PS.
1. Make a test print to obtain or verify the printer’s name.
2. On the server, back up the sys:\system\atps.cfg file.
NOTE: Make sure you include the beginning and end quotes in
the following commands.
Edit the atps.cfg file, and add a line with the Kodak printer
AppleTalk Name and its associated AppleTalk Zone to the list
of printers in the following format:
<Appletalk Printer Name>:<Appletalk Zone>
For example, enter the following command:
“Kodak DS 8650 PS:No_Trespassing_Zone”
NOTE: Make sure you include the quotation marks in the
command.
If no queue is stated, a NetWare queue associated with the
AppleTalk Printer Name, NW_Kodak_DS_8650_PS, is
created. You can verify this using PCONSOLE.
To create a different queue name, enter the following
command:
<Appletalk Name>:<Appletalk Zone> -o <queuename>
For example, enter:
“Kodak Printer:No_Smoking_Zone” -o Color_Printer_q
NOTE: Refer to the “Troubleshooting/AppleTalk” Section for
details on defining and assigning AppleTalk Zones.