Kodak XLS 8400 - Manual (Page 31)

Network Printer Parameters
4-6 Part No. 1H9613 June 1997
2. Respond to the prompts from the program.
An output file named RSSERVER.RS is created.
3. Send the file to the printer through a port such as the parallel
port. The following command is one example of sending the
file to the printer when using the parallel port. The CNTL_D
file is found on the Utilities for Novell diskette and is only
necessary if the file is downloaded using the parallel port.
COPY RSSERVER.RS + CNTL_D LPT1:
4. When the file has been sent to the printer, power cycle the
printer to allow the change to take effect.
Printer Parameters - AppleTalk
AppleTalk Name
Default AppleTalk names are the equivalent of specific printer
product names.
Defaults:
‘Kodak XLS 8400 PS’
‘Kodak XLS 8600’ or ‘Kodak XLS 8600 PS’
‘Kodak DS 8650’ or ‘Kodak DS 8650 PS’
‘Kodak DS DCP 9000’
Utilities For Printers in PostScript Mode
• The Namer— Macintosh utility used to rename the printer in
PostScript mode. This is the printer name as it appears as a
PostScript printer in the Chooser or similar PC/AppleTalk
Zone-Name window.
• Set_Printer_Name.ps—utility which renames the printer in
PostScript mode. This is the printer name as it appears as a
PostScript printer in the Chooser or similar PC/AppleTalk
Zone-Name window. Edit the file to modify the name
parameter, save the file, and download the file to the printer.