Kodak XLS 8400 - Manual (Page 87)

Windows NT 4.0 Workstations and Servers
10-8 Part No. 1H9613 June 1997
Configuring Your Printer for AppleTalk
NOTE: NT AppleTalk supports printing in PostScript mode
only. Use TCP/IP queues to support both PostScript
and Raster mode printing.
10. Click on Add Port in the Add Printer Wizard window.
The Printer Ports window opens.
11. Select “AppleTalk Printing Devices”.
NOTE: If AppleTalk Printing Devices is not in the menu,
install AppleTalk Protocol. If necessary, refer to
“Network Service and Protocol installation.”
The Available AppleTalk Printing Devices window opens.