Kodak XLS 8400 - Manual (Page 47)

Novell NetWare
6-8 Part No. 1H9613 June 1997
For NetWare 4.X, select “Print Queue” from the Print Jobs
menu.
4. For NetWare 3.X, select “Queue Servers”.
For NetWare 4.X, select “Status” and “Print Server.”
5. Press Insert to display the Queue Server Candidates.
6. Select the server you want to serve the queue, and press
Enter.
7. Press Esc to exit PCONSOLE.
Repeat this procedure for each queue you want the printer to
serve.
NOTE: When using PCONSOLE, you must specify the same
queue name and printer name that was used with
KSETUP.
8. Turn the printer off and then on.
9. After approximately 5 minutes, verify that the printer has
logged into the correct server by entering the following
commands on the appropriate server:
For NetWare 3.X, enter USERLIST /A.
For NetWare 4.X, enter NLISTUSER /A /B.
You should see the print server name logged into the network
as it is defined in the KSETUP file.