Kodak XLS 8400 - Manual (Page 28)

Network Printer Parameters
Part No. 1H9613 June 1997 4-3
Mode
Default: PrintServer(ps)
The mode is always PrintServer, and it cannot be modified by
users.
Printer Parameters - IPX (Novell Netware)
FrameType
Default: AutoSelect
In AutoSelect mode, the printer tries the various frametypes
available until it receives a response from an IPX server. From
that point, the printer only uses the frametype that was
successful.
Use the following procedure to select a specific printer IPX
frametype from the printer’s front display/control panel. If your
network has multiple file servers that use different frame types,
you may want to select the frametype that the primary server will
use. Selectable frametypes are:
• AutoSelect 802.2
• AutoSelect 802.3
• Ethernet 2
• SNAP
NOTE: If you are setting up a Kodak Digital Science
TM
Desktop
Color Proofer 9000, refer to the user’s guide for the
Network Interface Card shipped with the proofer for
specific instructions on using the display/control panel.
1. Press Setup/Select on the display/control panel when
“READY” appears in the panel.
Power
Error
Cancel Print
Setup/Select scroll