Konica Minolta MAXXUM 5D - Manual (Page 101)

101
VIDEO OUTPUT
Camera images can be displayed on a television. The video output can be changed
between NTSC and PAL. North America uses the NTSC standard and Europe uses the
PAL standard. Check which standard is used in your region to play back images on your
television set.
1. Turn off the television and the camera.
2. Slide the card-slot door toward the back of the camera to
release the safety catch and open.
3. Insert the plug of the video cable into the camera’s video-
out terminal.
4. Plug the other end of the video cable into the video input
terminal on the television.
5. Turn the television on.
6. Change the television to the video channel.
7. Turn on the camera and press playback button. The
camera’s monitors do not activate when the camera is
attached to a television. The playback-mode display is
visible on the television screen.
8. View images as described in the playback section. Because
of the broadcast standard used to display television
images, image quality and resolution will appear lower than
when displayed on a computer monitor.
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out
terminal which can be used to connect the camera to a television using the supplied
video cable.