Konica Minolta MAXXUM 5D - Manual (Page 76)

76 R ECORDING MENU
WIRELESS / REMOTE FLASH
Wireless/Remote flash allows the camera to control
an off-camera Program/Maxxum 5600HS(D) and
3600HS(D) flash unit without the need of a cable.
Single or multiple flash units can be placed around
the subject to create different lighting effects.
The camera’s built-in flash fires to control the off-
camera flash units rather than to illuminate the
subject.
On-camera
flash
Wireless/
Remote
flash
1. Remove the accessory shoe cap (p. 112) and slide a Program/Maxxum 5600HS(D)
or 3600HS(D) flash on the accessory shoe until the safety lock engages.
2. Turn on the camera and flash unit.
3. Set the camera to the wireless flash mode in section 2 of the recording menu (p. 70).
This simultaneously set a the flash to the wireless mode and sets the camera to the
flash’s wireless channel.
4. Press and hold the mounting-foot-release button on the flash unit to disengage the
safety catch and remove the flash unit from the camera.
Flash mode Fill-flash
Flash control Red eye
Bracket order Rear sync.
Wireless Reset