Konica Minolta MAXXUM 5D - Manual (Page 116)

116 D ATA - TRANSFER MODE
CONNECTING TO WINDOWS 98 / 98 SECOND EDITION
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, inset it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows operating systems.
AUTOMATIC INSTALLATION
Before connecting the camera to the
computer, place the Digital Camera
Software CD-ROM in the CD-ROM
drive. The Digital Camera Software
installer launcher
opens. To
automatically install the Windows 98
USB driver, click on the “Install the
Windows 98 USB mass-storage
driver” button. A window appears to
confirm that the driver should be
installed; click “Yes” to continue.
When the driver has been
successfully installed, a window
appears. Click “OK.” Restart the
computer before connecting the
camera (p. 115).