Konica Minolta MAXXUM 5D - Manual (Page 42)

42 A DVANCED RECORDING
Shutter priority is set with the exposure-mode dial (p. 39). The
photographer selects the shutter speed and the camera sets
the appropriate aperture to ensure correct exposure.
Turn the control dial (1) to adjust the shutter speed between 30
and 1/4000 second in 1/3 Ev increments. The shutter speed is
displayed on the monitor and in the viewfinder.
Pressing the shutter-release button partway down displays the
corresponding aperture. Press the shutter-release button all
the way down to take the picture.
APERTURE PRIORITY - A
SHUTTER PRIORITY - S
Aperture priority is set with the exposure-mode dial (p. 39). The
photographer selects the aperture and the camera sets the
appropriate shutter speed to ensure correct exposure.
Turn the control dial (1) to adjust the aperture in 1/3 Ev
increments. The aperture range depends on the lens. The
aperture is displayed on the monitor and in the viewfinder.
Pressing the shutter-release button partway down displays the
corresponding shutter speed. With the camera sensitivity (ISO)
set to auto, the shutter speed may not change when the
aperture is adjusted because the shutter speeds can change in
fine steps. Press the shutter-release button all the way down to
take the picture. For information on ƒ-numbers, see page 55.
There is a limit to the maximum shutter speed when using the built-in flash. When Anti-Shake is
on, the maximum shutter speed that can be used is 1/125s. With Anti-Shake off, the flash sync.
speed is 1/160s. While a faster shutter speed cannot be used, there is no limit to the use of slower
shutter speeds. Flash range is dependent on the aperture, see page 55.
Flash Sync. Speed