Konica Minolta MAXXUM 5D - Manual (Page 104)

104 S ETUP MENU
FOLDER NAME
100KM028
10150801
(Standard)
(Date)
SELECT FOLDER
This option specifies in which folder images are saved. Only
folders with a standard folder name can be selected. If the
date folder name option is used, images are placed in a
folder with the corresponding date of recording. Select
folder is in section 2 of the setup menu (p. 98).
All recorded images are stored in folders on the memory card. Folder
names come in two formats: standard and date.
Standard folders have an eight character name. The initial folder is
named 100KM028. The first three digits are the folder’s serial number,
which increases by one each time a new folder is created. The next two
letters refer to Konica Minolta, and the last three numbers indicate the
camera used; 028 indicates a Maxxum/Dynax 5D.
A date folder name also starts with the three digit serial number and is
followed by one register for the year, two register for the month, and two
registers for the day: 100YMMDD. The folder 10150801 was created in
2005 on August 1
st .
With the date folder format selected, when an image is recorded a new folder with the
day’s date is created. All images recorded that day are placed in that folder. Images
recorded on a different day are placed in a new folder with the corresponding date. When
a new folder is created, the serial number in the image-file name is reset to 0001 unless
file number memory is active. For more information on folder organization and file names,
see page 120.
File # memory Off
Std. form
100KM028
–
Folder name
Select folder
New folder