Konica Minolta MAXXUM 5D - Manual (Page 66)

66 A DVANCED RECORDING
Custom-white-balance function allows the camera to be
calibrated to a specific lighting condition. With the white
balance dial in the custom position, press the white-
balance button to open the setting screen.
CUSTOM WHITE BALANCE
Fill the spot metering area with a white or neutral object;
the object does not need to be in focus. Press the
shutter-release button all the way down to calibrate the
camera.
An image of the reference target is displayed. Press the
central button of the controller to complete the
operation.
A guidance message appears. If the shutter-release
button is pressed partway down, the monitor display
returns. The red custom set indicator is displayed in the
white-balance panel. Turn the white-balance dial to
another position to cancel the routine.
Custom white balance
Use spot metering area.
Press shutter to calibrate.
Spot metering area
Custom white balance
:OK