Kyocera S2410 User Manual

Page 10

Advertising
background image

2

Phone battery

Battery care

General safety guidelines

• Do not disassemble or open the battery.
• Do not crush, bend, deform, puncture, or

shred the battery.

• Do not attempt to insert foreign objects into

the battery.

• Do not immerse the battery or expose it to

water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.

• Always keep the battery between 15 °C and

25 °C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a cooking
surface, iron, or radiator.

• Never use any damaged battery.
• Only use the battery for its intended phone.
• Only use the battery with a qualified charger.

Use of an unqualified battery charger
may present a risk of fire, explosion,
leakage, or other hazard. If you are
unsure about whether a charger is
qualified, contact customer support.

• Do not short-circuit the battery or

allow metallic conductive objects—such
as keys, coins, or jewelry—to contact
the battery’s terminals.

• Replace the battery only with another qualified

battery. Use of an unqualified battery may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a replacement battery is compatible, contact
customer support.

• Promptly dispose of used batteries in

accordance with local regulations and
recycle if possible. Do not dispose as
household waste.

• Supervise all battery usage by children.
• Avoid dropping the phone or battery. If

the phone or battery is dropped, especially
on a hard surface, an internal short-circuit
can occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.

• Improper battery use may result in a fire,

explosion, or other hazard.

Common causes of battery drain

• Playing games or using the Web.
• Taking pictures with the flash on.
• Keeping backlighting on.
• Operating in digital mode when far away from

a base station or cell site.

• Using data cables or accessories.
• Operating when no service is available, or

service is available intermittently.

• High earpiece and ringer volume settings.
• Repeating sound, vibration, or lighted alerts.

82-K8216-1EN.book Page 2 Monday, September 22, 2008 2:27 PM

Advertising