Kyocera S2410 - Manual (Page 62)

54 Security
3. Select Limit Calls and one of the following:
– No Limit does not limit calls.
– Limit Outgoing limits outgoing calls.
Incoming calls can be answered.
– Limit All limits both incoming and
outgoing calls.
ICE numbers
The ICE (in case of emergency) numbers
feature allows you to specify three personal
phone numbers that can be called when the
phone is locked.
1.
Select Menu > Settings > Security .
2. Enter your four-digit lock code.
3. Select ICE Numbers .
4. Select an Unassigned slot.
5. Enter the number and select Done .
You can view these numbers only when they’re
being entered for the first time.
To make a call to an ICE number from a locked
phone, you must dial the number (including area
code) exactly as it was stored in ICE numbers.
Erase contacts
You can erase all entries from your
Contacts directory.
1.
Select Menu > Settings > Security .
2. Enter your four-digit lock code.
3. Select Erase Contacts and one of
the following:
–
No exits without erasing contacts.
– Yes erases all contacts. A confirmation
prompt appears to verify your decision.
4. Select Yes to confirm.
New lock code
Change your lock code from the default provided
by the service provider. The lock code is typically
0000 or the last 4 digits of your phone number.
1.
Select Menu > Settings > Security .
2. Enter your four-digit lock code.
3. Select New Lock Code .
4. A confirmation prompt appears. Select Yes .
5. Enter a new four-digit code.
6. Re-enter your new lock code.
The lock is now changed.
82-K8216-1EN.book Page 54 Monday, September 22, 2008 2:27 PM