Kyocera S2410 - Manual (Page 46)

38 Timer
– MR displays currently stored value on
the screen.
– MC clears value currently stored
in memory.
Timer
The Timer counts down for the specified time.
It beeps when that amount of time has elapsed.
1.
Select Menu > Tools > Timer > Set .
2. Enter the time length.
– Scroll left or right to move between
hours, minutes and seconds fields.
– Scroll up or down to change hours,
minutes and seconds.
3. If needed, select Sound and one of the
sounds to change the sound.
4. To work the timer, select the
following options:
–
Start begins the countdown.
– Stop pauses the countdown.
– Reset clears the timer.
When the countdown is complete select Off to
silence the alarm.
Stopwatch
The Stopwatch counts time for you.
1.
Select Menu > Tools > Stopwatch .
2. To work the stopwatch, select the
following options:
–
Start begins counting.
– Stop pauses counting.
– Reset clears the stopwatch.
Press the Back key to return to the menu.
World clock
The world clock lets you check times in cities
around the world in relation to local time.
Set world clock
1. Select Menu > Tools > World Clock .
The world clock menu is displayed. Your
local time and date is on the first line,
followed by your selected world city and that
city’s time and date.
2. When you first access World Clock, scroll left
or right to select a time zone.
The world clock menu is displayed again, with the
new time zone.
Search world clock
From the world clock menu, you can search by
city or country.
1.
Select Menu > Tools > World Clock >
Options > Search City or Search Country .
2. In the search field, enter letter(s) to search
by. Results are listed as you type.
3. Select a city or country from the list.
82-K8216-1EN.book Page 38 Monday, September 22, 2008 2:27 PM