Kyocera S2410 - Manual (Page 19)

User Guide 11
Voicemail
Configure your voicemail
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
1.
Press and hold the 1 key.
2. Follow the system prompts to create a
password and record a greeting.
Check your voicemail
When a voice message is received, your screen
displays a notification along with a voicemail
message icon at the top of your screen. The
symbol flashes if the message is urgent. If you
see a notification:
1.
Select Call , which initiates a call to your
voicemail number.
2. Follow the system prompts to retrieve
the message.
Note: To clear the screen without checking
messages, select
Ignore .
If you see only the voicemail message icon:
1.
Press and hold the 1 key.
2. Follow the system prompts to retrieve
the message.
Set voicemail alert
You can set the phone to beep or vibrate every five
minutes to remind you that you have voicemail.
For more information, see “Alerts” on page 22.
Roaming calls
Set roaming alert
You can set phone to alert you when you roam
outside of your home service area. See “Roaming
service alert” on page 52.
Set roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges. See
“Roam ringer” on page 48.
Set call guard
You can set the phone to warn you before you
answer or place a call while roaming. See “Roam
call alert” on page 53.
Emergency services
Call emergency service
You can call an emergency code, even if your
phone is locked or your account is restricted.
When you call, your phone enters Emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
82-K8216-1EN.book Page 11 Monday, September 22, 2008 2:27 PM