Kyocera S2410 - Manual (Page 57)

User Guide 49
Flip sounds
Assign specific sounds for when your phone flip
opens or closes.
1.
Select Menu > Settings > Sounds >
Flip Sounds > Flip Open or Flip Close .
2. Select a sound. As you scroll down the list
you will hear the sounds.
Power on/off sound
You can set your phone to play a sound when
powering on and off.
1.
Select Menu > Settings > Sounds >
Pwr On/Off Sound .
2. Select Enabled to activate the power on/off
sounds or Disabled to deactivate the power
on/off sounds.
Keypad
Control the keypad tones of the phone.
Key sound
To choose the sounds the keys make when
pressed, select
Menu > Settings > Sounds >
Keypad > Key Sound > Tone , Click or Off .
Key length
To control the length of the keypad tones, select
Menu > Settings > Sounds > Keypad >
Key Length > Normal or Long .
Voice features
Following features allow you to customize the
voice commands.
Automatic add
You can set the phone to automatically add a
contact to your voice dial list when you create
a new contact. Select
Menu > Settings >
Voice Features > Automatic Add > Enabled .
Expert mode
When expert mode is enabled, instead of
speaking a command following the initial
voice prompts, you can speak the command
after you hear a tone. Select
Menu > Settings >
Voice Features > Expert Mode and one of
the following:
•
Normal sets phone to default voice prompts.
• Expert sets phone to sound tones instead of
voice prompts.
Display results
You can set the phone to display up to three
recognition contacts when calling or searching
for a contact with voice commands. Select
Menu > Settings > Voice Features >
Display Results > Single Best or Three Best .
82-K8216-1EN.book Page 49 Monday, September 22, 2008 2:27 PM