Kyocera Neo E1100 - Manual (Page 13)

User Guide 13
The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent
accidental key presses.
1. Camera lens.
2. Volume key raises or lowers ringer volume.
3. Camera key activates Camera mode. To activate camera mode,
press and hold the Camera key.
4. External screen displays time, caller ID, signal, and battery strength.
5. Lightpipe LED.
6. Jack for micro USB cable (sold separately).
7. Jack for a hands-free headset (sold separately).
Warning: Inserting an accessory into the incorrect jack will
damage the phone.
Lightpipe LED Behavior
Your phone’s light pipe LED displays different patterns depending upon the alert. You can disable the light
pipe LED, see “Set Light Pipe Behavior” on page 54.
Note: Incoming emergency calls always activate the LED, even if you have disabled it.
New message One flash. If you do not respond, your phone will flash again to remind you.
Incoming call Heartbeat pulse. It will continue until you answer the phone or miss the call.
Missed call One flash. If you do not respond, your phone will flash again to remind you.
In call Wave pulse. It will continue until the call ends.
Alarm Three flashes. It will continue until you respond to the alert.
Scheduler Three flashes. It will continue until you respond to the alert.
Bluetooth One flash. It will continue until you respond to Bluetooth request.
Low battery One flash. It will continue until you charge the phone.
Charging Wave pulse. Displays when the phone is being charged.