Kyocera Neo E1100 - Manual (Page 61)

User Guide 61
Enable Voice Privacy
Set your phone to use enhanced digital
CDMA privacy. Select
Menu > Settings >
Network > Voice Privacy > Enhanced .
Enable Roaming Service Alert
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
Select
Menu > Settings > Network > Roam/Svc
Alert and one of the following:
• Disabled turns roaming service alert off.
• When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
• On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
• On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Set Roaming Restrictions
You can restrict your phone from making a call
when roaming.
Select
Menu > Settings > Network >
Roam Option and one of the following:
• Automatic allows roaming.
• No Roaming does not allows roaming.
Set Phone Line
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection.
Select Menu > Settings > Network >
Set Phone Line and a phone line.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.