Kyocera Neo E1100 - Manual (Page 18)

18 End Phone Calls
Answer Using Speakerphone
Press the Speakerphone key.
Answer Using Flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data calls. For more
information, see “Enable Open to Answer” on
page 57.
End Phone Calls
To end a phone call press the End key.
Activate Voice Dialing
1. Press and hold the Send key.
2. Follow the prompts.
For more information, see “Voice Commands” on
page 78.
Volume Control
There are several ways to control the volume of
your phone.
Adjust Volume during a Call
To adjust the earpiece volume during a call, press
the
Volume key up or down.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key during
an incoming call, you will answer the call.
Silence an Incoming Call
• To silence the phone without answering the
call select Silence , press the Back key, or
press the Volume key.
• To silence the phone and answer the call,
select Silence and then press the Send key.
Note: In the absence of voicemail, this feature
drops the call.
Use Speed Dialing
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can use
speed dialing you must save a phone number as a
contact and assign a speed dial location to it. See
“Customize a Number” on page 27.
To call a contact that has a speed dial location.
1. Enter the one- or two-digit speed
dial location.
2. Press the Send key.