Kyocera Neo E1100 - Manual (Page 59)

User Guide 59
Voice Wake-up
Enable Voice Wake-up
You can set your phone to make a call using a
headset.
1. Set the phone to play sound from
the headset, see “Set Headset Sounds” on
page 59.
2. Select Menu > Settings > Voice Features >
Voice Wake-up > With Accessory .
Use Voice Wake-up
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear
two tones.
If the phone does not recognize your Wake Up
command, see “Use Voice Training” on page 59.
Use Voice Training
If your phone is having trouble recognizing
your voice, you can train by speaking
number commands.
1. Select Menu > Settings > Voice Features >
Voice Training .
2. Read the message and select OK .
3. Select Train Numbers .
4. Read the message and select OK .
5. Follow the prompts displayed on the
screen. Speak each number until training
is complete.
To untrain your phone select Menu > Settings >
Voice Features > Voice Training > OK >
Untrain Numbers .
Accessories
This section describes settings that affect
accessories you use with your phone.
Set Headset Sounds
When a headset is attached to your phone, the
ringer can be played through the headset or
phone speaker.
Select
Menu > Settings > Accessories >
Headset Sounds and one of the following:
• Out of phone rings from the phone speaker.
• Out of headset rings from the headset.
Enable Auto-Answer
When a headset is attached to your phone, the
phone can be set to answer automatically.
Select
Menu > Settings > Accessories >
Auto-Answer > After 5 Seconds . The phone will
automatically answer after 5 seconds.
Enable TTY
You can connect the phone to a teletype (TTY)
device for the hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to your phone.