Kyocera Neo E1100 - Manual (Page 26)

26 Customize Contacts
Add Contact from Contacts Menu
To add a contact to your Contacts directory:
1. Select Menu > Contacts > Add New .
2. Enter a name for the contact. When you are
done scroll down to the next field.
3. Enter a primary number for the contact.
4. Enter additional phone numbers, email
addresses, Web addresses and note, if
needed. Scroll up or down to move through
the contact fields.
5. When you are done entering information,
select
Save .
Add Code or Extension
When you save the phone number of an
automated service, you may include a pause to
stop dialing. For example, a pause where you
would wait to dial an extension.
1. From the home screen, enter a
phone number.
2. Select Options and a type of pause:
– Time Pause causes the phone to stop
dialing for two seconds.
– Hard Pause causes the phone to
stop until you select Release while
making the call.
3. Enter the remaining numbers and
select
Save > Save New Contact .
4. Complete the contact and select Save .
Customize Contacts
Edit Contact Details
To edit details of an existing contact.
1. Select Menu > Contacts > View All .
2. At the contacts directory, select a contact.
3. At the contact details screen, select Edit .
4. Edit or add phone numbers, email
addresses, Web addresses and notes.
Scroll up or down to move through the
contact fields.
5. When you are done entering information,
select
Save .
Customize a Name
To customize the name of an existing contact.
1. Select Menu > Contacts > View All .
2. At the contacts directory, select a contact.
3. At the contact details screen, scroll to
the name.
4. Select Options and one of the following.
– Ringer assigns a specific ringer to
the contact.
– Msg Tone assigns a specific message
tone to the contact.
– Picture assigns a specific picture to
the contact.
– Erase Contact deletes the contact. This
will erase the entire contact.
– Send as vCard sends the contact as
a vCard.