Kyocera Neo E1100 - Manual (Page 17)

User Guide 17
2 Call Features
This section describes call features such as
volume, holding calls, speed dialing and
other features.
Power Phone Up
• To turn your phone on, press the End key and
wait until the phone display lights up.
• To turn your phone off, press and hold the
End key until the phone plays a musical chime
and turns off.
Make Phone Calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you see
“Power Save” on your phone’s screen, press
any key to return to normal operating mode.
There are several ways you can make a
phone call.
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Call Using a Contact
1. Select Menu > Contacts > View All to open
your contacts list.
2. Highlight a contact and press the Send key.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page 78.
Redial a Number
1. Press the Send key twice to open your
call history.
2. Highlight a phone number or contact and
press the
Send key.
Note: To redial the last number called, received
or missed, press the
Send key three times.
Answer Phone Calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact’s
name appears. There are several ways you can
answer a phone call.
Answer Using Earpiece
Press the Send key.