Kyocera KM-P4850w - Manual (Page 25)

CHAPTER 3 GETTING READY FOR PRINTING
3-7
(2) How to Set a Paper Roll
Use the same procedure when replacing a paper roll.
IMPORTANT
When replacing a paper roll, turn the flanges on both sides to rewind
the paper.
1 Open the front cover until it locks.
2 Grasp the roll unit handles A to release the lock and pull out
the roll unit until it stops.
3 Lift up the release levers 1 and adjust the flange guides 2
on both sides to the paper size.
4 Insert an included flange into the core of the new roll.
A
A
1
2
5 Grasp the flange and turn its lever in the direction indicated
by the arrow to align the inside and outside m marks on the
flange. The flange will be secured to the paper roll.
IMPORTANT
If the lever of the flange is not easily turned, attach the included
flange handle B and turn the flange handle in the direction indicated
by the arrow to align the inside and outside m marks on the flange.
* Also if the lever of the flange is not easily turned when the flange is
removed, use the flange handle.
6 Secure the other flange to the paper roll similarly.
7 Set the paper roll in the roll unit by aligning it with the flange
guides 2.
After setting the paper roll, check that the flange tray has not
moved.
2
2
B