Kyocera KM-P4850w - Manual (Page 61)

7-1
CHAPTER 7 SPECIFICATIONS
<Hardware>
Type ............................................................................... Console
Printing system .............................................................. Indirect electrostatic
Compatible Print Sizes ................................................... Maximum: 36" x 48" 36" (W) x 237" (L)
[A0 920 mm (W) x 6000 mm (L)]
Minimum: 8 1/2" x 11" 8 1/2" (W) x 11" (L)
[A4 (portrait) 210 mm (W) x 297 mm (L)]
Thickness: 64 to 80 g/m
2
Void Area: Leading/trailing edge of paper: 10 mm or less, right/left edge of paper: 3 mm or
less
Print speed ..................................................................... 2.6 ppm printer: 2.6 sheets/minute for 36" x 48" [A0], 4 sheets/minute for 36" x 24" [A1]
3 ppm printer: 3 sheets/minute for 36" x 48" [A0], 6 sheets/minute for 36" x 24" [A1]
Warm up time ................................................................. Within 600 seconds (Room temperature 68 °F/20 °C, Humidity 65 %RH)
Interface ......................................................................... One 100BASE-TX (or 10BASE-T) port
Memory .......................................................................... 2.6 ppm printer: 128 MB as standard
3 ppm printer: 256 MB as standard
Paper feed system ......................................................... Two roll units and bypass
Compatible print media .................................................. Standard paper (64 to 80 g/m
2 ), vellum, film
Writing system ................................................................ LED
Resolution ...................................................................... 600 dpi x 600 dpi
Developing system ......................................................... Dry
Toner supply system ...................................................... Bottle cartridge system
Fixing system ................................................................. Heat roller
Cleaning system ............................................................ Blade and fur brush
Photoconductor .............................................................. OPC (with dew prevention heater)
Features ......................................................................... Size adjustment, fixing temperature, energy saver, auto shutoff, self-diagnosis
Power source ................................................................. 120 V AC, 60 Hz, 14 A
230 V AC, 50 Hz, 7 A
Power consumption ....................................................... 1680 W (120 V)
1610 W (230 V)
Dimensions .................................................................... 52 3/8" (W) x 27 11/16" (D) x 43 1/8" (H)
[1330 mm (W) x 704 mm (D) x 1095 mm (H)]
Installation dimensions ................................................... 53 3/4" (W) x 30 1/2" (D)
[1366 mm (W) x 774 mm (D)]
Weight ............................................................................ Approx. 523.6 lbs. [Approx. 238 kg]
Noise emission ............................................................... <
=70 db (A)
Accessories .................................................................... Flanges, flange handle, bypass guide, and CD-ROM
Options ........................................................................... Roll unit, scanner unit, and key counter
(Specifications are subject to change without notice.)