Kyocera KM-P4850w - Manual (Page 42)

CHAPTER 5 MANAGEMENT AND SETTING
5-8
3 Press the N or M key to set the time that elapses before the
selected function is activated.
> If “1. Auto preheat” has been selected, set the time to from
5 minutes to 45 minutes.
Inch specifications
Auto preheat:
15min.*
Metric specifications
Auto preheat:
15min.*
> If “2. Auto shutoff” has been selected, set the time to from
15 minutes to 120 minutes.
Inch specifications
Auto Shutoff:
90min.*
Metric specifications
Auto Shutoff:
90min.*
4 Press the Enter key. The display will show “set ( value ) *” and
return to the step 1 screen.
5 Press the N or M key to select “End” [“back”].
6 Press the Enter key. The printer will return to the machine
settings screen.
7. Size adjustment
1 Press the N or M key to select a media type.
Inch specifications
Size adjustment:
1.Plain
Metric specifications
Size adjustment:
1.Plain
2 Press the Enter key.
3 The selected item will flash. Press the N or M key to select
the paper length (X).
The value can be set to from -3.0 % to +3.0 %.
Inch specifications
Plain:
X 0.0%* Y 0.0%*
Metric specifications
Plain:
X 0.0%* Y 0.0%*
4 Press the P key.
5 The selected item will flash. Press the N or M key to select
the paper width (Y).
The value can be set to from -3.0 % to +3.0 %.
Inch specifications
Plain:
X+0.1% Y 0.0%*
Metric specifications
Plain:
X+0.1% Y 0.0%*
6 Press the Enter key. The display will show “set ( value ) *” and
return to the step 1 screen.
7 Press the N or M key to select “End” [“back”].
8 Press the Enter key. The printer will return to the machine
settings screen.