Kyocera KM-P4850w - Manual (Page 41)

CHAPTER 5 MANAGEMENT AND SETTING
5-7
4 Press the Enter key. The display will show “set ( value ) *” and
return to the step 1 screen.
5 Press the N or M key to select “End” [“back”].
6 Press the Enter key. The printer will return to the machine
settings screen.
4. Roll end
1 Press the N or M key to select a media type.
Inch specifications
Roll end:
1.Plain
Metric specifications
Roll end:
1.Plain
2 Press the Enter key.
3 The selected item will flash. Select whether the paper’s
trailing edge is attached to the roll core by pressing the N or
M key to select “Fixed” or “Unfix” [“Unfixed”].
Inch specifications
Plain:
Unfix*
Metric specifications
Plain:
Unfixed*
4 Press the Enter key. The display will show “set ( value ) *” and
return to the step 1 screen.
5 Press the N or M key to select “End” [“back”].
6 Press the Enter key. The printer will return to the machine
settings screen.
5. Auto shutoff
1 The selected item will flash. Press the N or M key to select
the desired auto shutoff mode.
Inch specifications
Auto Shutoff:
Shutoff mode*
Metric specifications
Auto shutoff:
Shutoff mode*
2 Press the Enter key. The display will show “set ( value ) *” and
return to machine settings screen.
6. Timer set
NOTE
• If “5. Auto shutoff” is set to ”OFF”, the auto shutoff timer cannot be
set.
• When setting the auto energy saver time, do not set a longer time
than the auto shutoff time. When the auto energy saver time
exceeds the auto shutoff time, the auto shutoff function will engage
without the auto energy saver function having operated.
1 Press the N or M key to select the function for which the
timer is to be set.
Inch specifications
Timer set:
1.Auto pre heat
Metric specifications
Timer set:
1.Auto preheat
2 Press the Enter key.