Kathrein UFD 540 - Manual (Page 18)

On Screen Displays / OSD
18
With the

or

button, exit the help function and return to the
main menu. Press the

button again and return to the originally
received programme.
TV channel identifier
The channel identifier is displayed for several seconds every time the
channel is changed or by pressing the

button. The indicates
that a channel is received even if no picture can be seen (e.g. radio).
The film symbol indicates a TV channel and appears along with the
time, and whether teletext is received. The + in the third line stands
for the programme selection from the main channel list. If the favour-
ite list is selected, the "apple" symbol appears. This is followed by the
programme title, as well as start time and end time of the running pro-
gramme, provided this data is transmitted.
Radio channel identifier
The identifier for the set radio channel has the same configuration. A
radio appears in the upper left-hand corner indicating a radio channel.
Programme times and text are displayed only if the corresponding
data is transmitted with the signal.
Error message
"Bad or no signal" indicates that there is a fault in the receiving system
or in the receiver settings. If the transponder is not transmitting any
signals, the channel identifier shows a Sat antenna instead of .
Check the Sat IF connection and the LNB configuration. As an aid, re-
fer to the list of service settings provided at the end of the operating
manual.