Kathrein UFD 540 - Manual (Page 42)

Adding and Removing Satellites
42
Adding and Removing Satellites
Setting up satellites
Naturally, the LNB can also accommodate new satellites.
In order to do so, the orbit position, which you need to take a bearing
on, must be known. The “Antenna settings“ menu entry in the installa-
tion menu can be used as an aid for aligning the antenna.
Access the menu item "LNB configuration" via the main menu

and the „Installation“ - submenu with the

and

buttons
(plus password, if activated). Select this menu item by pressing

and then enter or select a new satellite.
Remember that your system must be set-up accordingly!
In the next step, move with
 
to e.g. the entry „User1“.