Kathrein UFD 540 - Manual (Page 40)

Channel list
40
Manually adding programmes
Basically, follow the same procedure for sorting in order to add a
channel.
With main menu button

, access the channel list.
By pressing the

button, the menu for adding a programme ap-
pears on the screen.
Here, you can carry out the entries for the new programme.
The first line in the list is highlighted with a coloured bar.
With the

buttons, you can move the bar vertically to the de-
sired position.
The setting of the respective position or respective entry, is carried out
with the

buttons and the numerical buttons.
It is possible to set
• the respective received satellite,
• the transponder, the transponder frequency
• the polarisation and
• the symbol rate.
Only alphanumerical and decimal entries are accepted at the positions
• Name,
• Video PID (Programme Identification),
• Audio PID,
• PCR PID (PCR = Programme Clock Reference) and
• Audio PID dig.
Attention: You can only call up
satellites which are included in
the installation menu.