Programme selection – Kathrein UFD 540 User Manual
Page 24
Programme Selection
24
button. The radio channel list is now displayed. The upper right-
hand column provides information relating to the received satellites, its
transmission frequency, the polarisation, the symbol, rate, the bouquet
and the scrambling. The programme position, the programme name,
and type of reception signal (free-to-air/scrambled) are provided on
the left. In the upper right-hand field you find the menu for the menu/
channel setting. Use the
buttons to switch to the next pro-
gramme, and with
buttons to skip to the neighbouring page. The
programme selection is confirmed by pressing
.
You can also select the desired programme with the numerical but-
tons.
Press the
button to exit the channel list and remain in the already
set programme.
Selecting a radio programme by number entry
You can select a different radio programme during a running radio
programme by entering the programme location number. Use the
number buttons
to
for the purpose of entering the programme
location number.
Example
You wish to select the radio programme "DLR-Berlin". This pro-
gramme is stored under the programme location number 15. (The or-
der of radio programmes is defined in the programme memory, and
therefore this only serves as an example.)
To select this programme, press the numbers
and
one after
the other. The receiver waits for about 3 seconds for entry of the next
number.
Follow the same procedure for all other programmes – i.e. also pro-
grammes with three-digit programme location numbers. You do not
have to enter leading zeros, unless for accessing teletext.