Kyocera SLIDER JET KX18 - Manual (Page 15)

User Guide for the Kyocera Slider Jet Phone 9
2 M AKING AND A NSWERING C ALLS
Making a call
Make sure you are in an area where a signal can
be received. Look for the
symbol on the home
screen. The more bars you see in this symbol, the
stronger the signal. If there are no bars, move to
where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you do not
see your home page on your phone’s screen
because it is in power save mode, press any key to
return to normal operating mode.
Slide open
1. Open the slide.
2. Enter the phone number and press the
send/talk key
.
3. To end the call press the end key or
close slide (if “Close to End” is enabled. See
“Ending calls using the slide”).
Slide closed
The voice dialing feature is the only method of
making a call when he slide closed. Voice dialing
requires that a contact be saved with a voice tag.
See page 57.
1. Press the send/talk key to initiate
voice dialing.
2. Say the name of the contact when prompted.
The phone places the call.
3. Press the end key once.
Ending calls using the slide
You can set the phone to end calls immediately
when you close the slide.
• Select
Menu
→
Settings
→
Convenience
→
Close to End
→
Enabled .
– Select Disabled to have the phone call
continue when you close the slide.
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up, and a dancing phone icon appears.
The phone number of the caller also appears if it
is not restricted. If the number is stored in your
Contacts directory, the contact name appears.
Slide open
• Press the send/talk key
to answer the
incoming call.
- or -
• Press to answer the incoming call and
turn on the speakerphone.
Slide closed
• Press the send/talk key
to select
Answer Call .
82-N8963-3EN.book Page 9 Thursday, September 21, 2006 9:04 AM