Kyocera SLIDER JET KX18 - Manual (Page 20)

14 Making and Answering Calls
If you see “New Messages”
Slide open or closed
1. Press the right softkey to select Call ,
which initiates a call to your voicemail
number.
2. Follow the prompts to retrieve the message.
To clear the screen without checking messages:
• Press the left softkey to select Ignore .
If you see only the symbol
Slide open
1. Press and hold to initiate a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
• You can set the phone to beep or vibrate every
five minutes to remind you that you have
voicemail. See “Setting message alerts” on
page 46.
Calling emergency services
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described below.
• Dial your 3-digit emergency code and
press the send/talk key .
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters
Emergency mode. This enables the
emergency service exclusive access to your phone
to call you back, if necessary.
To make or receive regular calls after dialing the
code, you must exit this mode.
To exit Emergency mode
When you have completed the emergency call:
1. Press to select Exit .
2. Press again to confirm your choice.
Note: To determine who has access to your
location, see “Setting position location” on
page 52.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Select Menu
→
Recent Calls .
2. Select a timer:
–
Recent Calls Timer tracks all calls you have
made and received since you last reset this
timer. To reset this timer to zero, press the
right softkey
to select Reset .
– All Calls Timer tracks all calls you have
made and received. This timer cannot
be reset.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
• Select
Menu
→
Settings
→
Sounds
→
Minute Alert
→
Enabled .
82-N8963-3EN.book Page 14 Thursday, September 21, 2006 9:04 AM