Kyocera SLIDER JET KX18 - Manual (Page 34)

28 Sending and Receiving Text Messages
Retrieving text messages
When a text message is received, your screen
displays “<x>New Messages” with the
symbol.
• Press the left softkey to select InBox ,
highlight the message, and press the left
softkey
to select View .
- or -
• To Ignore the message , press the right
softkey .
The symbol flashes if the message is urgent.
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. You can find the
older message in the InBox:
• Select Menu
→
Messages
→
InBox .
To view a message later
1. Select Menu
→
Messages
→
InBox . A list of
all your received messages appears.
–
indicates an “Urgent” message.
2. Scroll through the list of messages and press
to read one.
Reading the message
The options available to you may vary. Check with
your service provider.
Note: Sounds embedded in text messages will not
play if the phone is set to Silence All mode.
1. If the text message is long, press down to
view the entire message.
2. When you are finished, you can Erase the
message or select Options to do the following:
– Lock Msg to protect the message from
being accidentally deleted.
– Forward the message.
– Reply with Copy to reply to the message
with a copy of the original attached.
– Save Message to save the message.
– Save as QuickText to save the text from the
message as QuickText, which you can
insert into other messages. Graphics and
sound are not saved as part of
QuickText.(For more about QuickText, see
page 30.)
– View Sender information.
– Block messages from this sender.
3. Select Done .
Note: The symbol indicates that a graphic did
not come through. It may be too large or
incorrectly formatted.
Setting message alerts
You can set your phone to alert you of incoming
text messages or pages. For more information,
see “Setting message alerts” on page 46.
82-N8963-3EN.book Page 28 Thursday, September 21, 2006 9:04 AM