Kyocera SLIDER JET KX18 - Manual (Page 21)

User Guide for the Kyocera Slider Jet Phone 15
Receiving data or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. For more information, see page 51.
Understanding roaming
Controlling network roaming
Depending on services available from your
service provider, you may set the phone to either
digital or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
1. Select Menu
→
Settings
→
Network
→
Digital/Analog .
2. Select an option and press .
– Automatic automatically switches the phone
between digital and analog.
– Analog only sets the phone to work in
analog mode only.
– Analog call forces a call into analog mode
for the duration of the next call.
– Digital only sets the phone to work in digital
mode only.
Setting an alert for roaming
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
1. Select Menu
→
Settings
→
Network
→
Roam/Svc Alert .
2. Select an option and press .
– When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service
is acquired again.
– On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
– On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
• Select
Menu
→
Settings
→
Sounds
→
Roam Ringer
→
Enabled.
82-N8963-3EN.book Page 15 Thursday, September 21, 2006 9:04 AM