Kyocera SLIDER JET KX18 - Manual (Page 17)

User Guide for the Kyocera Slider Jet Phone 11
Dialing a three-way
conference call*
To dial a three-way conference call, dial the first
number and press
, dial the second number,
press again.
*May not be available on your phone, check with
your service provider
Setting the phone to hold calls
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Note: This feature will not work if “Open to
Answer” is enabled. See “Answering calls using
the slide” on page 10.
1. Select Menu
→
Settings
→
Convenience
→
Hold Call
→
Enabled.
– If you have not recorded a hold message,
you will be prompted to record one, such as
“Please hold. I’ll answer in a minute.”
2. Record the message twice, as prompted.
3. Select Save or Options ( Play , Re-Record ,
or Exit ).
The next time a call comes in, you will have the
option of placing it on hold.
Placing a call on hold
You can place a call on hold once you have
enabled this feature.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It will go to voicemail.
1. When a call comes in, press the right softkey
to select Hold Call . The caller will be
placed on hold and will hear your recorded
hold message.
2. To speak to the caller, select Answer .
- or -
To hang up without speaking to the caller,
select
End Call .
Changing the hold message
1. Select Menu
→
Settings
→
Convenience
→
Hold Call
→
Re-Record Msg and follow the prompts.
2. Record the message twice.
3. Select Save or Options ( Play , Re-Record ,
or Exit ).
Dealing with missed calls
When you have missed a call, “Missed Call”
appears on your screen unless the caller leaves
a voicemail.
• To clear the screen, press the left softkey
to select OK .
• To view details of the call, press the right
softkey to select Calls then press .
• To return the call, press to select Calls
then press the send/talk key .
82-N8963-3EN.book Page 11 Thursday, September 21, 2006 9:04 AM