Kyocera SLIDER JET KX18 - Manual (Page 64)

58 Using Voice Recognition
Note: If the phone finds multiple voice tags
that sound like the name you said, you will be
asked to verify which name you want to call.
Say
Yes when you hear the correct name. Say
No when you hear an incorrect name.
5. When you are finished with the call,
press the end key
if the slide is open.
Making a call using digit dialing
When using digit dialing, you speak digits to dial a
phone number.
Note: You cannot speak a string of digits. You must
speak one digit at a time and wait for the prompt.
1. From the home screen, press the send/talk
key
. The phone responds: “Say a name
or say Dial.”
2. Say “ Dial ”. The phone responds:
“Speak a digit.”
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
If you pause, the phone will prompt you with
the following five options. After the prompt,
speak an option.
– Say “
Clear ” to erase the last digit entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“
Clear ” again. When the phone prompts
you with “Clear entire phone number?”,
say “
Yes ” to clear or “ No ” to cancel.
– Say “ Call ” to dial the number.
– Say “ Verify ” to cause phone to repeat the
set of digits that you input.
– Say “ Cancel ” to exit voice recognizer and
return to the home screen.
– Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Using voice features with
hands-free car kits
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to a professionally installed Kyocera
hands-free car kit (sold separately).
Note: The following features apply only to
installed hands-free car kits unless noted.
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store or call
800-349-4188 (U.S.A. only) or 858-882-1410.
Waking up the phone
If your phone is connected to a Kyocera installed
hands-free car kit, you can use the voice
command to activate the phone to make a
phone call.
Note: Voice Wake-up does not work with
Keyguard active.
82-N8963-3EN.book Page 58 Thursday, September 21, 2006 9:04 AM