Modifying the dip switch (for macintosh) setting, Macintosh adapter cable dip switch setting (o=on), Monitorresolution123456 – Knoll Systems HT200 User Manual

Page 12: Multiple scan 21ooo, Some examples of dip switch settings

Advertising
background image

Modifying the DIP switch (for Macintosh) setting
Modify the DIP switch setting on the MAC cable as shown below.
Macintosh adapter cable DIP switch setting (o=ON)

MONITOR

RESOLUTION 1 2 3 4 5 6


Multiple

scan

21

o o o


Multiple

scan

21

o o o


Multiple

scan

21

o o o o


VGA/SVGA

o o


21

Color 1152x870

o o o o


19

Color

1024x768

o o


16

Color

832x624

o o


13 Color

640x480

o

o


Some examples of DIP switch settings:

Inch 13

Multiple Scan 17

VGA/SVGA

Using the remote control as a computer mouse - Wireless mouse function

The supplied remote mouse receiver enables you to operate your computer's mouse functions
from the remote control. It is a great way to control your computer-generated presentations.
• The cursor key on the remote control operates the computer mouse functions.

• If a Windows computer is connected, the L-CLICK button on the remote control operates as

the computer mouse left click button and the R-CLICK button as the computer mouse right
click button.

• If the Macintosh computer is connected, the L-CLICK and R-CLICK buttons operate in the

same way as the computer mouse click button.

• While the menu is displayed on the screen (see page 18), the cursor key, L-CLICK and R-

CLICK buttons will operate to control the menu.

Before connecting:

• Turn off the computer, and then remove the current mouse.

• Connect the computer and remote mouse receiver with the supplied serial mouse cable as

shown in the above illustration.

• The projector and computer will be turned on as described in "Using the Projector" on page

13. Do not turn on either the computer or unit until you read this section.

• Please also refer to the manual of the computer to be connected.

12

Advertising