Knoll Systems HT200 - Manual (Page 3)

Table of Contents
2 IMPORTANT SAFETY INFORMATION
3 Table of contents
4
Basic information
5 Features
5 Remote
control
6 Terminal
connections
7 Projector part identification
8 Projector positioning
9 Connecting video equipment
10 Connecting component video
11 Connecting a PC or Macintosh
13 Using the remote control as a computer mouse
13 Wireless mouse function
13
Using the projector
13 Selecting the input source
15 Turning the projector off
16 Changing the computer’s video resolution
17 Freezing and enlarging the picture
18 Menu operations
18 Selecting input sources (more)
19 Selecting the projection type
19 Selecting a display language
19 Adjusting the volume
19 Selecting the background
20 Setting "INPUT MODE' to "YCbCr"
20
Quick starting the projector
20 Adjusting the image from the source connected to the RGB IN connector
21 Timing Chart
24 Adjusting the picture elements
24 Selecting the picture type
25 Selecting the wide screen display
25 Activating the power saving function
25 Activating the on-screen function
26 Turing the projector off with the screen functions
26 Checking hours of lamp use
26 Resetting all to the factory settings
27 Specifications
27
D-Sub pin assignments
28 Troubleshooting
29
When the STATUS indicator lights or blinks
29 Replacing the lamp housing
3