Kenwood NEXEDGE NX-200 - Manual (Page 21)

2
!1 Keypad (keypad models only)
Press the keys on the keypad to send DTMF tones. The
keypad keys can also be programmed with secondary
functions {page 5} if a programmable function key is
programmed as Function.
!2 key
Press to activate its programmable function {page 5}. The
default setting is Menu mode.
!3 key
Press to activate its programmable function {page 5}. The
default setting is Zone Up.
!4 key
Press to activate its programmable function {page 5}.
!5 key
Press to activate its programmable function {page 5}.
!6 key
Press to activate its programmable function {page 5}. The
default setting is Zone Down.
!7 key
Press to activate its programmable function {page 5}.
!8 Universal connector
Connect the (optional) speaker/ microphone here {page 9}.
Otherwise, keep the supplied cap in place.