Kenwood NEXEDGE NX-200 - Manual (Page 45)

36
TRUNKING CALLS (ANALOG)
m
Aking A
t
elephone
c
All
■ Manual Dialing
1 Select your desired zone and telephone group ID.
2 Press the PTT switch to start the call.
3 Enter your desired number using the DTMF keys.
■
Selecting a Number from the List
1 Select your desired zone and telephone group ID.
2 Press the key programmed as Autodial.
• The last called unit appears on the display.
3 Press the / keys to select your desired list
number.
4 Press the PTT switch to make the call.
r
eceiving A
t
elephone
c
All
When a call is received, press and hold the PTT switch to
speak, and release it to receive.
• Only one person can speak at a time.