Kenwood NEXEDGE NX-200 - Manual (Page 44)

35
A
utodiAl
Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1 Press the key programmed as Autodial, or access the
Autodial function through the Menu {page 23}.
• The first entry in the Autodial list appears on the display.
2 Press the / keys or enter the appropriate DTMF
number (0 ~ 32) to select your desired Autodial list
number.
• The stored entry appears on the display.
3 Press the PTT switch to make the call.
S
tun
c
ode
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
either transmit mode will be disabled, or both receive mode
and transmit mode will be disabled. The stun code is cancelled
when the transceiver receives a call with a revive code.