Kenwood NEXEDGE NX-200 - Manual (Page 38)

29
• Priority 1 + Talkback/ Priority2 + Talkback: If your
dealer has programmed a Priority channel (either Priority 
or Priority 2), this channel is the revert zone and channel.
The transceiver “talks back” on the current receive channel.
S
cAn
d
elete
/A
dd
You can add and remove zones and/or channels/group IDs to
and from your scan list.
1 Select your desired zone and/or channel/group ID.
2 Press the key programmed as Zone Delete/Add (to
add/remove zones) or Scan Delete/Add (to add/remove
channels/group IDs)
• You can also press and hold the key programmed as Scan
Delete/Add to add/ remove zones .
p
riority
-c
hAnnel
S
elect
If the Priority channel has been set as Operator Selectable by
your dealer, you are also able to reprogram the Priority mode.
1 Select your desired zone and channel.
2 Press the key programmed as Priority-chanel Select.
• A list of channel types appears on the display.
3 Press the / keys to select the channel type for your
current channel.
• You can set the channel as “NORMAL”, “PRIORITY ”,
“PRIORITY 2”, or “PRIORITY &2”.
4 Press the key to save the setting and exit Priority-
channel Select Mode.